309 Insertion – Reinforced Nitrile (NBR) Rubber Sheeting

Our 309 Reinforced Nitrile Rubber sheet can be manufactured to customer specification.

 

Properties

Nitrile is considered by many the workhorse of the rubber products industry, the material’s acrylonitrile content provides first rate resistance to common oils and fuels.

Reinforced Nitrile Rubber Sheeting | Nitrile Rubber Insertion Sheet | Nitrile Rubber Engineered Textiles or Fabrics are considered synonyms for the same products as technically they possess very similar characteristics.

Available as either single or multi-layer insertion, a range of custom manufacture options are available including High Temperature and Hydrogenated and BS2751. With the finished product supplied as either cloth or smooth finish. Uncured reinforced Nitrile Rubber sheeting can also be supplied up to 1.85m wide, substrate options include:

  1. Polyester reinforced nitrile sheeting
  2.  Nylon reinforced nitrile sheeting
  3.  Nylon leno reinforced nitrile sheeting
  4.  Cotton reinforced nitrile sheeting
  5.  Rayon reinforced nitrile sheeting
  6.  Nomex reinforced nitrile sheeting
  7.  Kevlar reinforced nitrile sheeting
  8.  Glass cloth reinforced nitrile sheeting
  9.  Steel mesh reinforced nitrile sheeting
  10.  Scrim reinforced nitrile sheeting
  11.  Aramid reinforced nitrile sheeting

 

Reinforced Nitrile Rubber Sheeting Manufacturing Guidelines:

ColourBlack or coloured
WidthUp to 1.85m wide depending on Substrate
GaugeFrom 0.25mm upwards
Total weight>125 G/M²
Insertion weight65 G/M² – 850 G/M²
HardnessRanging from 30° – 90° IRHD
ConstructionSingle or multi-layer construction. Dissimilar faces
Cure stateCured or un-cured supported NR sheeting
Surface finishCloth or Smooth finish surface
Roll lengthsCustomer request (10m+), bulk roll capability
AncillariesPanel cutting, laminating, reinforced strip (slitting)
AvailabilityMade to order to customer specification. Subject to minimum order quantity

Full data sheets for all grades are available on request.

* The information above is supplied in good faith and believed to be correct. This information is supplied upon the condition that persons receiving this will make their own determination as to its suitability for their purposes prior to use. EMI makes no representations or warranties, either expressed or implied with respect to the information or the product to which this information refers.