331 Insertion – Reinforced VAMAC (EA/AEM) Rubber Sheeting

Our 301 Reinforced Vamac® sheet can be manufactured to customer specification.



Vamac® and other Ethylene Acrylic rubbers demonstrate a good array of general properties and excel in terms of low temperature flexibility, resistance to oils (but not aggressive chemicals or fuels) and their ability to be effectively compounded for low smoke/ low toxicity applications.

Reinforced VAMAC Sheeting | VAMAC Insertion Sheet | VAMAC Engineered Textiles or Fabrics are considered synonyms for the same products as technically they possess very similar characteristics.

Available as either single or multi-layer insertion, a range of custom manufacture options are available. With the finished product supplied as either cloth or smooth finish. Uncured reinforced VAMAC sheeting can also be supplied up to 1.85m wide, substrate options include:

  1. Rayon reinforced Vamac® sheeting
  2. Nomex reinforced Vamac® sheeting
  3. Kevlar reinforced Vamac® sheeting
  4. Glass cloth reinforced Vamac® sheeting
  5. Steel mesh reinforced Vamac® sheeting
  6. Aramid reinforced Vamac® sheeting
  7. Polyester reinforced Vamac® sheeting
  8. Nylon reinforced Vamac® sheeting
  9. Nylon leno reinforced Vamac® sheeting
  10. Cotton reinforced Vamac® sheeting


Reinforced Vamac® Rubber Sheeting Manufacturing Guidelines:

WidthUp to 1.85m wide depending on Substrate
GaugeFrom 0.25mm upwards
Total weight>125 G/M²
Insertion weight65 G/M² – 850 G/M²
HardnessRanging from 30° – 90° IRHD
ConstructionSingle or multi-layer construction.
Cure stateCured or un-cured supported VAMAC sheeting
Surface finishCloth or Smooth finish surface
Roll lengthsCustomer request (10m+), bulk roll capability
AncillariesPanel cutting, laminating, reinforced strip (slitting)
AvailabilityMade to order to customer specification. Subject to minimum order quantity

Full data sheets for all grades are available on request.

* The information above is supplied in good faith and believed to be correct. This information is supplied upon the condition that persons receiving this will make their own determination as to its suitability for their purposes prior to use. EMI makes no representations or warranties, either expressed or implied with respect to the information or the product to which this information refers.